To make your 450 size helicopter to larger 480 Size ... Description: ●This conversion kit design for all 450 Pro helicopter at market , after convert & equipped with 360mm main blade and 22.2v power,can improve the wind resistance and flight control. ●Integrated battery and ESC mounting platform, with adjusted battery position to achieve the most optimal CG position of the helicopter. ●New improved frame , increases the battery room for 6S1P 22.2v / 1200-1500mah Lipo & improved side plates with dedicated 3GY mounting location, to simplify wire management and overall aesthetics. ●New style gyro mounting platform with added length. ●Highly rigid and lightweight carbon side plates. ●Unique anti-centripetal force weight tail blade grips to improve rudder locking effect. ●Highly efficient torque tube tail drive design, dramatically reduce power loss found on belt driven system. ●Streamlined design canopy. Specification: ●Main Blade Length:360mm ●Main Rotor Diameter:780mm ●Tail Rotor Dimeter:165mm ●Motor Pinion Gear:12T ●Main Drive Gear:121T ●Autorotation Tail Drive Gear:106T ●Tail Drive Gear:25T ●Drive Gear Ratio:1:10.08:4.24 Equipment required: Lipo battery / 6S1P 22.2v 1200-1500mah ESC / Up to 40A ,support 6S 22.2v BLS Motor / Support 6S 22.2v 1600 to 1800KV Packaging: ●480 RIGID High Grade Fiberglass Canopy x 1 ●Canopy lock washer x 2 ●480 FAST Carbon Fiber Main Frame - 1.2mm x 2 ●Carbon Bottom Plate x 1 ●Gyro Carbon Mount x 1 ●Canopy Mounting Bolt x 2 ●Screw(M2.5x12) x 2 ●Metal Anti-rotation Bracket x 1 ●Socket button head screw(M2.5x5) x 2 ●Battery Mount x 1 ●Gyro Mount x 1 ●Socket button head self tapping screw(M2x6mm) x 6 ●Tail Boom x 1 ●Torque Tube x 1 ●Torque Tube Bearing Holder(5.5x11.25x8mm) x 2 ●Bearing(4x8x3mm) x 2 ●480 Tail Linkage Rod x 1 ●Ball Link x 2 ●Metal Tail Holder Set x 1 |